Problem Possible cause Solution
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
Clean the shaving heads
thoroughly or replace
them. Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
The appli-
ance does not
shave as well as
it used to.
The shaving heads
are damaged or
worn.
Replace the shaving heads
(see 'Replacement').
Hairs or dirt obstruct
the shaving heads.
Clean the shaving heads in
the regular way (see
'Cleaning and
maintenance') or clean
them thoroughly.
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one (see
'Replacement'). Then
separate the cutter from its
guard and rinse each
matching set under the tap.
After rinsing, place the
cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
You have not reset
the appliance.
Reset the appliance by
pressing the on/o button
for approx. 7 seconds (see
'Replacing the shaving
heads').
41
S9090-43_EN_A6_CS6_0519.indd 41 17/05/19 18:37
