Problem Possible cause Solution
The travel lock is
activated.
Press the on/o button for
3 seconds to deactivate the
travel lock.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
Clean the shaving heads
thoroughly or replace
them. Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
The appliance d oes
not shave as well
as it used to.
The shaving heads
are damaged or
worn.
Replace the shaving heads.
Hairs or dirt obstruct
the shaving heads.
Clean the shaving heads
in the regular way or clean
them thoroughly.
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one (see 'Replacement').
Then separate the cutter
from its guard and rinse
each matching set under
the tap. After rinsing,
place the cutter back into
its corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').
I replaced
the shaving
heads, but the
replacement
reminder is still
showing.
You have not reset
the replacement
reminder.
To reset the replacement
reminder, press and hold
the on/o button for
approx. 7 seconds.
English
48
