English
29
Problem Possible cause Solution
To clean the shaving heads
thoroughly,
remove the shaving heads
from the shaving head
holder one by one (see
'Replacement'). Then
separate the cutter from
its guard and rinse each
matching set under the
tap. After rinsing, place
the cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder
(see 'Replacement').
I replaced
the shaving
heads, but the
replacement
reminder is still
showing.
You have not reset
the appliance.
Reset the appliance by
pressing the on/o button
for approx. 7 seconds.
A shaving
head symbol
has suddenly
appeared on the
display.
This symbol is
a replacement
reminder.
Replace the shaving heads
(see 'Replacement').
Water is leaking
from the bottom
of the appliance.
During cleaning,
water may collect
between the inner
body and the
outer shell of the
appliance.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
The nose
trimmer
attachment pulls
at the hairs.
You move the
appliance too fast.
Slowly move the
attachment around to
remove all unwanted hairs
in your nostrils.
