- when the motor stops or starts running slower
When you have charged the shaver for the rst
time and after a long period of disuse, optimise the
battery capacity in the following way:
1 Fully charge the shaver (see section ‘Charging
the shaver’ below).
2 Empty the battery through normal use
(shaving).
3 Repeat this process 2 more times.
Note: If you optimise the battery capacity in this way,
you can also charge the shaver in between shaves, even
if the battery is not completely empty yet. This does not
damage the battery.
1 Put the appliance plug in the shaver.
2 Put the mains plug in the wall socket.
Note: Make sure the shaver is switched off.
, The charging light goes on.
3 Charge the shaver for at least 8 hours
(HQ6970/HQ6950/HQ6920) or 1 hour
(HQ6990), but not more than 24 hours.
- HQ6990: When the battery is fully charged, the
charging light starts ashing.
- HQ6970/HQ6950/HQ6920: The charging light
stays on as long as the shaver is connected to the
mains.
Note: Do not leave the shaver connected to the mains
continuously.
CHARGE
8
