
Tempstar units that are manufactured with the above referenced data plate are able
to be field converted to different phases and voltages. To accomplish this, your unit
should have shipped with the Tempstar Phase Conversion Kit, part number 06401-
003-71-71. This kit contains the appropriate decals and schematics to apply to your
unit once the conversion is complete.
All work should be performed only by Authorized Jackson Service Agents. A listing of your
local agents is in the back of your installation manual.
Perform the appropriate wiring and component changes as necessary to achieve
the desired result. Reference Jackson technical manuals or contact technical ser
Verify the Schematic is correct. If not, replace with the correct one from the kit.
At the power inlet, remove the “Wired For” decal and replace with the one that
matches the configuration of your machine.
MINIMUM RINSE TEMPERATURE
MINIMUM INCOMING WATER TEMPERATURE
208-230-460 Volt/60 Hz/3 Phase
208-230 Volt/60 Hz/1 Phase