HP Markası'nın Ürünleri

2Overview

The steps required to install the NetServer in the rack are summarized below:

NOTE This is only a summary; detailed instructions are provided on the

following pages.

• Measure and mark the appropriate holes on all four rack columns

• Install one bar nut on each of the four rack columns

• Insert two rack nuts on each of the two front columns only

• Attach the slides to the columns

• Extend the slides

• Remove power supply modules and hot-swap drives from the NetServer

• Lift the NetServer onto the slides

• Secure the NetServer to the slides

• Remove the lifting handles from the NetServer

• Install the power supply modules and hot-swap drives in the NetServer

• Push the NetServer back into the chassis

• Install the recessed mounting brackets on the two front columns only