STEP 1
Assembly Instructions 2/4
A
B
E
C
Cam Lock Screw
Insert Cam Lock Screws
into the pre-drilled holes of Top (A),
Base (E).Side Panel (B) and (C),
Cam Lock Screw
Wood Screw
Magnet
Attach 2X Magnets
to Top (A) by
using Wood Screws
in the pre-drilled
holes (see Figure 1).
Figure 1
D1
D2
Cam Lock
Screw
Cam Lock
E
Figure 2
STEP 2
Attach Middle Panel (D1)
and (D2) onto Base (E)
with Cam Locks. (see Figure 2)
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
