Dil ID: 6
Dil Adı: turkish
Dil Kodu: tr1tayfun GE Markası'nın Ürünleri
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



PROBLEM
POSSIBLE CAUSE AND REMEDY
ДМП ni M
iry a vinegar rinse, nemove an mecai utensiis ana wasn loaa as usual but
omit the dry portion of the eyele. With load stili in dishwasher, set a bowl
о / КЛЛ
___
__
t>
______________________
j:„u
«-uiii/diiiiiig ^ cu|ja \ayjKj iiii; ui
wuilc
viiiegai tm uuLuuni lat-ts.. ivun uian-
1*/О О V4 ¿ir» ♦-1л r»/^l 1 /nrV» о
VVdOAA^i. UlIAl^U^ll a
FTHHING r^i lCf»H Vi\/ iiCl’nfT f r\r\ mur'K rlotororonf in cnff T^Kic m 11 If \/ film
like surface cannot be removed because metal ions have been rem.oved
from the surface of the glass. To prevent this problem, use less deter
gent when your water supply is naturally soft or when you use a water
softener. Also, wash glassware in shortest cycle that will get them clean. <lK.
BROWN FILM
FORMATION
Tea or coffee stains in cups Can be removed by hand Using a solution of
1 /0 «— ui
----------
u ^
___
1 o
_______
...
_________
.....4.____
V eup uieacii aiiu o cujjs oi waiui watei.
An over-all yellow or brown film on dishes can be caused by iron
deposits in water. Glassware becomes yellow or brown but is still
transparent. The installation of an iron filter in the water supply line
removes the cause of this problem and is the only permanent solution.
For more complete information, contact your local water conditioning
company.
Yellow film on sterling silver can result when copper utensils are
washed in the same load.
CHIPPING OF CHINA
AND GLASSWARE
Rough handling of dishes will cause chipping. Load with care. Seat
dishes firmly in the racks so they cannot be dislodged. Glasses must
lean against the pins, and the rim of the glass should rest on the
bottom of the rack. When placing tall glassware and stemware in the
dishwasher, check to make certain that they will clear the top of the
tub. Glasses and stemware should always be piaced in the upper rack.
NEVER in the low^er rack. (See section on loading)
WATER STANDS IN
SUMP AT БО1 lOM
Water remaining in the sump at end of cycle is normal. This water is
clean and keeps the pump primed and the water seal moist and active.
11