WARNING!
Refer to Safety chapters.
Introduction
The start of the appliance does not occur or
it stops during operation.
First try to find a solution to the problem
(refer to the table). If not, contact the
Authorised Service Centre.
With some problems, the acoustic signals
operate. The indicator of button flashes
in red and one of the indicators comes on,
to show an alarm code:
• - The appliance does not fill with water
properly.
• - The appliance does not drain the
water.
• - The appliance door is open or not
closed correctly. Please check the door!
• The indicator of button flashes in red
11 times and 1 (or 2 or 3) time(s) in
yellow: The mains supply is unstable.
Wait until the mains supply is stable.
WARNING!
Deactivate the appliance before you
do the checks.
Possible failures
PROBLEM POSSIBLE SOLUTION
The programme does not
start.
• Make sure that the mains plug is connected to the mains
socket.
• Make sure that the appliance door is closed.
• Make sure that there is not a damaged fuse in the fuse box.
• Make sure that the Start/Pause has been pressed.
• If the delay start is set, cancel the setting or wait for the end
of countdown.
• Deactivate the Child Lock function if it is on.
The appliance does not
fill with water properly.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
• Make sure that the water tap is not clogged.
• This problem may be caused by the filter of the inlet hose or
the valve drain filter which may be clogged. Refer to “Care
and cleaning”. If problem remains please contact the Au‐
thorised Service Centre.
• Make sure that the inlet hose has no kinks or bends.
• Make sure that the connection of the water inlet hose is cor‐
rect.
22
TROUBLESHOOTING
