6
Dishwasher detergent is corrosive! Take care to keep it out
of reach of children.
To remove hard water s
ots, tr
the followin
:
Run dishes throu
h a normal wash
ro
ram.
Remove all metal dishware, such as cutler
,
ans, etc.,
from the dishwasher.
Do not add detergent.
Pour two cu
s of vine
ar into a bowl and set the bowl face
up on the lower rack of the dishwasher.
Run the dishwasher through a normal wash program.
If this doesn't work, try the same process with 1 / 4 cup of
citric acid crystals instead of vinegar.
Use only detergent specifically made for use in dishwashers.
Keep your detergent fresh and dry. Don't put powder detergent
into the dispenser until You're ready to wash dishes.
YOU MAY NOT ADD TOO MUCH DETERGENT TO PREVENT THE FORMATION OF DEPOSITS BECAUSE YOUR DISHWASHERS
HAVE SPECIALLY-DESIGNED WATER SOFTENERS.
The dis
enser must be refilled before the start of each wash c
cle followin
the instructions
rovided in the" Wash C
cle
Table".Your dishwashers use less deter
ent and rinse aid than conventional dishwashers. Generall
, onl
one tables
oon of
detergent is needed for a normal wash load. Also, more heavily soiled items need more detergent. Always add the detergent just
before starting dishwasher, otherwise it could get damp and will not dissolve properly.
The rinse a
ent dis
enser holds 3.5 oz. of rinse a
ent. Under normal
conditions, this will last approximately one month. Try to keep it full,
but do not overfill.
Make sure the dishwasher door is fully open.
Turn the dispenser knob to the left and lift it out.
Add rinse agent until the indicator window looks full.
Clean up any spilled rinse agent with a damp cloth.
Replace the dispenser knob.
The amount of rinse a
ent released into the final wash can be ad
usted.
The factory setting is at the midpoint. If there are rings of calcium
(hard water) spots on dishes, try a higher setting.
Remove the dispenser knob; then turn the adjuster counterclockwise
to increase the amount of rinse agent.
Indicator
Dis
enser ca
Ad
ustable settin
To o
en the wash cover,
ress the button and the cover
will flip back.
Button
