Encore electronic Markası'nın Ürünleri

Chapter9 Upgrade Firmware

This chapter describes how to upgrade firmware. Please follow one of the following

methods:

Method A: Using the ENNUS1 Server’s Web Pages

Please refer to section 6.2.2 for details.

Method B: Using the Init Button and the TFTP Client

1. Plug in the power adaptor while pressing the Init button until the USB LED

blinks. Please note that after this step, the ENNUS1 Server will operate

using the factory default values, i.e., your ENNUS1 Server’s

configuration will revert to factory default values.

2. Run the TFTP client Tool: Image Burner, from Windows Start menu.

3. Click Open Image to open your new firmware. Please note that you must

configure your PC’s TCP/IP such that PC and the ENNUS1 Server belong to the

same LAN, e.g. PC’s IP is 192.168.1.xxx and subnet mask is 255.255.255.0.

4. Click Upload Image.

5. Wait for Image Uploading to finish and then click Close.

6. Unplug the power adapter and then plug in the power adapter to restart the

ENNUS1 Server.