Enable-IT Markası'nın Ürünleri

92D-Link DIR-868L User Manual

Section 3 - Conguration

This Wizard helps you add wireless devices to the wireless network.

The wizard will either display the wireless network settings to guide you through manual conguration, prompt you to enter the

PIN for the device, or ask you to press the conguration button on the device. If the device supports Wi-Fi Protected Setup and has a

conguration button, you can add it to the network by pressing the conguration button on the device and then the on the router

within 60 seconds. The status LED on the router will ash three times if the device has been successfully added to the network.

There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A registrar

only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the

device. The router acts as a registrar for the network, although other devices may act as a registrar as well.

Click to start the wizard and turn to page 41.

Add Wireless

Station:

You can also simply press the WPS button on the side of the router, and then press the

WPS button on your wireless client within 120 seconds to automatically connect without

logging into the router.

Refer to page 115 for more information.

WPS Button