page 3
Bright backlit LCD Display
Shows battery gauge, and
all menu functions.
Single receiver (REV-S), or
two receivers in a single rack
space (REV-D)
40+ simultaneous channels
are possible with the REV!
Backlit LCD Display
shows the Group/
Channel, transmitter
battery status, diversity
operation, RF and Audio
level meters, and space
for a custom name
Headphone jack for audio
monitoring with volume control.
REV-D lets you monitor either or
both receivers at the same time!
Interchangeable:
Handheld allows you to
switch mic capsules!
The Intelligent Remote & Integrated Supervision Network allows
conguring, controlling and monitoring the REV Wireless system along
with complete PA-system from one central location. IRIS-Net allows the
creation of customized graphical user interfaces to optimally match any
application offering easy control and monitoring of the REV system.
Go to http://irisnet.electrovoice.com
to download the IRIS-Net software.
REV UHF Wireless System
REV-Dual Receiver System
IRIS-Net
Concert Level
REV-D - Wireless Dual-Channel Receiver
REV-S - Wireless Single-Channel Receiver
Know about wireless mic dead
spots before they happen.
SoundCheck mode gives you:
• Running tally
• RF levels
• Antena location test
The REV-Dual receiver includes two receiving channels, an IEC-type switching power
supply, integrated, rack-mounting hardware, front-panel audio output controls, headphone
listening jack, antenna pass-through, and phantom power on the antenna inputs. There is
also a CAN bus connection* on the back for use with REV-Link software for monitor and control.
Factory set channel groups allow up to 16 systems to operate simultaneously in one frequency band. For
groups up to 44 systems, EV can help with the coordination and custom groups are easily programmed.
Advanced ClearScan™, automatic group and channel selections, allows quick, simple setup. REV-D Dual
Receiver includes antenna pass through jacks so up to six receivers can be connected to just two antennas.
All required cables are included. Specially designed “Sound Check” mode provides the ability for one person
to walk test the microphone in the performance space with tangible results. Combination Tone plus Amplitude
squelch for maximum exibility. Balanced XLR line level output and 1/4-inch unbalanced line-level outputs
adjustable from the front panel to match the application. Guitar mode matches the optimized instrument audio
with the REV-BP bodypack. Internal universal switching power supply, headset monitoring jack, and DC power
on antenna input jacks for optional RF amplier.
* See page 13 for UCC1 accessory
