9
II-2. WPS Setup
If your wireless router/access point supports WPS (Wi-Fi Protected Setup)
then you can use this method to setup your wireless extender.
1. Press the WPS button on your wireless router/access point to activate its
WPS.
Please check the instructions for your wireless router/access point
for how long you need to hold down its WPS button.
2. Within two minutes, press and hold the WPS
button on the wireless extender for two
seconds. The extender’s LED should flash
green to indicate that WPS is in progress.
3. The devices will establish a connection. The extender’s LED should display
on (green) for 30 seconds to indicate a successful connection.
