53
Select “Use the following IP address” if your ISP requires that
you do so.
Enter the primary and secondary DNS addresses assigned by
your ISP here.
Check the “Enable Dual-WAN Access” box if your ISP requires
you to do so.
NOTE: These settings must be configured according to your Internet service. Please
contact your Internet service provider if you are not sure what to select.
Configure the “PPTP Settings” section.
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
Input the PPTP gateway assigned by your ISP here.
Give this connection a name (optional).
Input the MTU value of your network connection here. If you
do not know, use the default value.
Check the “Enable” box if you are in Israel and using BEZEQ
network services.
Please specify a connection type here. There are 3 options:
1. “Continuous” keeps the Internet connection alive all the
time.
2. “Connect on Demand” only connects to the Internet when
you initiate Internet connection.
3. “Manual” connects to the Internet only when the
“Connect” button on this page is clicked, and disconnects
when the “Disconnect” button is clicked.
