7 Frequency responses
On-axis frequency response
of Miniature Microphones.
Please notice that Type 4065
only utilizes the low boost
frequency response.
8 Warranty
All products from DPA Microphones are covered by a one-year limited warranty on both
mechanical functionality and documented specifications as long as the items are not
mistreated, abused or modified in any way. In case of a warranty claim your invoice is your
warranty registration.
9 CE Standard
The CE-mark guarantees all products conform with relevant standards approved by the
European Community. The products described in this User’s Manual comply with current
relevant standards when used with cables from DPA Microphones.
EMC Directive: 89/336/EEC, amended by 92/31/EEC and 93/68/EEC Low Voltage Directive:
73/23/EEC, amended by 93/68/EE
A Soft boost grid
B High boost grid
A
B
19
6 Specifications
Cartridge type: Pre-polarized condenser
element with vertical diaphragm
Principle of operation: Pressure
Power Supply: Via the Adapter System
from DPA Microphones
Frequency response:
Short grid: 20Hz-20kHz ±2dB,
3dB soft boost at 8-20 kHz
Long grid: 20Hz-20kHz ±2dB,
10dB boost at 12 kHz
Directional characteristics: Omnidirectional
Sensitivity:
4060: Nominally 20mV/Pa ± 3dB at 1kHz
4061: Nominally 6 mV/Pa ± 3dB at 1kHz
4062: Nominally 1 mV/Pa ± 3dB at 1kHz
4065: Nominally 6 mV/Pa ± 3dB at 1kHz
4066: Nominally 6 mV/Pa ± 3dB at 1kHz
Equivalent noise level A-weighted:
4060: Typ. 23dB(A) re. 20µPa (max. 26dB(A))
4061: Typ. 26dB(A) re. 20µPa (max. 28dB(A))
4062: Typ. 33dB(A) re. 20µPa (max. 37dB(A))
4065: Typ. 26dB(A) re. 20µPa (max. 28dB(A))
4066: Typ. 26dB(A) re. 20µPa (max. 28dB(A))
Equivalent noise level CCIR 468-1:
4060: Typ. 35dB (max. 38dB)
4061: Typ. 38dB (max. 40dB)
4062: Typ. 45dB (max. 49dB)
4065: Typ. 38dB (max. 40dB)
4066: Typ. 38dB (max. 40dB)]
Max SPL:
4060: 134dB SPL before clipping
4061: 144dB SPL before clipping
4062: 154dB SPL before clipping
4065: 144dB SPL before clipping
4066: 144dB SPL before clipping
Total Harmonic Distortion: 123dB SPL
peak (<1% THD); 120dB SPL sine (<1% THD)
Preamplifier:
Output impedance: 30-40 Ohm
Cable drive capability: <300m
Dimensions:
Microphone length: 12.7mm
Microphone diameter: 5.4mm
Capsule diameter: 5.4mm
Weight:
4060, 4061 & 4062: 7.5g incl. cable and
MicroDot connector
4065 & 4066: 14g incl. cable and MicroDot
connector
Finish:
4060 & 4061: Black, beige or white
4062 & 4065 & 4066: Black or beige
18
