|
Connection and startup
11
|
devolo MicroLink dLAN Wireless
|
EN
dLAN
Link: Lights up if connected to the power supply.
Col: Flashes at a faster rate if the network is experiencing heavy use.
Act: Flashes when data are being sent or received over the power
lines.
2.3 Connecting the MicroLink dLAN Wireless
Before connecting the dLAN adapter, note its security ID and keep it ready for
configuring the network. You can find the security ID on the bottom of the
MicroLink dLAN Wireless adapter.
햲 Insert the MicroLink dLAN Wireless adapter into an available electrical
outlet.
No drivers are required for running the MicroLink dLAN Wireless.
햳 For further information on installing the devolo tools, please refer to the
chapter on 'devolo MicroLink dLAN Software'.
