4
4) Insert the creased edge of the Media
into a Slot, and then proceed according
to the width:
Rewinder
Hub
Media
Slot
creased edge
Full Width Media –
Insert the Retainer (Item ) into the
Slot, over the creased edge and
around the Rewinder Hub. Begin
printing.
Rewinder
Hub
Retainer
Slot
creased edge
Narrow Width Media –
While holding the creased edge in
place, manually rotate the Rewinder
Hub counterclockwise several times
to secure the Media. Then align the
Tabs to the Slots and slide the
Guide (Item ) onto the Rewinder
Hub. Position the Guide lightly
against the Media and tighten the
Thumbscrew. Begin printing.
Rewinder
Hub
Slots
Guide
Tabs
Thumbscrew
Media
5) When it’s time to unload the Internal
Rewind option, tear or cut the Media
(and, if installed, remove the Guide) then
grasp and slide the Roll off the
Rewinder Hub.
Rewinder
Hub
Guide
Thumbscrew
Media
Roll
