Figures
1. 4247 Printer: Front and Rear Views .....3
2. Printer Dimensions ..........5
3. Removing the Shipment Locks from the Printer 6
4. The Operator Panel ..........6
5. The Ribbon Cartridge .........7
6. Opening the top cover using the small handles
on either side of the top cover. ......7
7. Turn the ribbon-winding knob in the arrow
direction ..............8
8. Aligning the right and left cartridge pins with
the printer locking points. ........8
9. Correct ribbon placement between the print
head and the Ribbon Guide mask. .....9
10. Clipping the cartridge into place.......9
11. Removing the two screws on the metal plate. 12
12. Sliding the board in the slot. .......13
13. Attaching the Controller Board. ......13
14. Power switch in the 0 position (OFF) ....15
15. Inserting the power cable ........16
16. Power switch in the I position (ON) ....17
17. Operator Panel ...........19
18. Unlit ON LINE indicator ........19
19. Lit ON LINE indicator .........19
20. Load Front1 indicator .........21
21. Online indicator ...........21
22. Function Keys............25
23. Emulation Options Menu ........32
24. Parallel Interface Parameters .......47
25. Serial Interface Parameters .......49
26. LAN Interface Parameters........53
27. Printer function flow chart .......57
28. Main Structure ...........62
29. User Macro Parameters ........64
30. User Macro Parameters (continued) ....65
31. Tear No Options Path .........82
32. Tear Normal Options path .......83
33. Tear Automatic Options path.......84
34. Label Options path ..........85
35. Paper Paths ............87
36. Opening the Push tractor cover. ......89
37. Sliding the left sprocket to the first printing
column. ..............89
38. Opening the left and right sprocket covers. 90
39. Inserting the paper perforation on the left
sprocket pins ............90
40. Inserting the paper on the right sprocket pins 91
41. Matching the left sprocket for the first printing
position ..............92
42. Adjusting the right sprocket .......93
43. Moving the sprocket levers to the lock
position. .............93
44. Correctly Loaded Paper ........94
45. Sliding the ribbon guide out of the print head. 98
46. Removing the used ribbon cartridge by lifting
itup................99
47. Gripping the bail assembly. .......106
48. Inserting the left and right paper bail end cap
pivots into the side frames. .......106
49. 4 pin Front2 Push Tractor option .....109
50. Aligning the hooks..........109
51. Pushing the Front2 tractor until it is fully
engaged.
.............110
52. Inserting the connector cable ......110
53. Rotating the Front2 push tractor onto the
Front1 push tractor. .........111
54. Disconnecting the connector cable.....111
55. Opening the Push tractors cover .....112
56. Moving the sprocket lever down. .....113
57. Opening the sprocket covers ......113
58. Inserting the paper on the right sprocket pins 114
59. Positioning the left sprocket for printing 114
60. Moving the sprocket lever to the locked
position. .............116
61. Loading the paper into the printer. ....116
62. Rotating the Front2 push tractor option 117
63. Inserting the fanfold paper .......117
64. Repositioning the Front2 push tractor 118
65. Three Level Floor Stand ........119
v
