HDMI SWITCH SPLITTER 4×4 （matrix）by Cat5
５
parameter as follow:
Baud frequency：4800
Data bit: 8
Parity bit: N
Stop bit: 1
Data stream: NON
C. Inputting your instruction. The instruction should be two or three letter, and
finish with “Enter” button.
Please input next instruction in three seconds or the”Overtime instruction”
will appear.
The input instruction should be right, or you will be rejected with the “wrong
instruction”
If the input or output that you chose is not connected to devices or not in
power-on mode, “ineffective instruction” will inform you.
If your instruction is performed, you can see the instruction of “successful
operation”.
③. Instruction input method
A. Selecting source device
Sequence number of output (A/B/C/D) + sequence number of the input
(1/2/3/4) + “Enter”
For example: If you want display B to view source 3, then you can input “B3
“and finish with “Enter”.
B. Turning off an output
C + Sequence number of the output that you want to turn off (A/B/C/D) +
“Enter”
For example: If you want to turn off output B, then you can input CB, and
finish with “Enter”.
C. Turning off the Switch Splitter:
OFF + “Enter”
D. Turning on the Switch Splitter:
ON + “Enter”
E. Inquiry:
QS + “Enter”
This order enables you know which input and output are available and the
connections of input and output.
