2 - Press-stud
Fig. 25
Opening the front of the hood
1 - Frame
2 - Cross-bar
Fully open
Open out from the outside once the front of the hood has been
opened:
Remove from the tube of the frame (1), the pins (Fig. 27, Mark 2)
attached to the canvas hood, and tip over the frame towards the
front (3).
Secure it by means of the hooks (Fig. 24, Mark 2).
Free the hood securing plate (Fig. 28, Mark 1) from the lugs (2).
Roll up the hood as far as the rear window and fasten it down by
means of the straps (Fig. 29, Mark 1) and press-studs (2).
Fig. 27
Opening the hood completely
1 - Pivoting frame
2 - Retaining pins
3 - Tipping over the frame
Fig. 28
Opening the hood completely
1 - Securing plate
2 - Lugs
3 - Securing strap
Fig. 29
Opening the hood completely
1 - Securing strap
2 - Press-stud
3 - Securing plate
[Contents] [Notices] [Important Points] [Driving] [Maintenance] [Minor Repairs] [Miscellaneous Information]
