Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 6
Feature Description
Management
●
Simple Network Management Protocol (SNMP) versions 1, 2c and v3
●
Event logging: local, syslog, email alerts
●
Firmware upgradable through web browser; imported/exported configuration in text format
●
Simple browser-based configuration (HTTP/HTTPS)
●
UPnP, Bonjour
●
Network diagnostics with packet captures
Performance
●
NAT throughput: 95 Mbps
●
1000 concurrent sessions
●
VPN throughput: 25 Mbps
Wireless LAN Specifications
Table 2 gives the wireless specifications for the Cisco RV120W.
Table 2. Wireless LAN Specifications
Feature Description
WLAN hardware IEEE 802.11n standard-based access point with 802.11b/g compatibility
Radio and modulation type:
●
802.11b: direct sequence spread spectrum (DSSS)
●
802.11g/n: orthogonal frequency division multiplexing (OFDM)
●
2 omnidirectional 1.8 dBi gain external antennas
Operating channels:
●
11 in North America
●
13 in most of Europe
●
Automatic channel selection
Transmit power:
●
802.11b: 17 dBm +/– 1.5 dBm
●
802.11g: 15 dBm +/–1.5 dBm
●
802.11n: 12.5 dBm +/– 1.5 dBm
Receiver sensitivity:
●
802.11b: 11 Mbps@ –90 dBm
●
802.11g: 54 Mbps @ –74 dBm
●
802.11n: 270 Mbps @ –71 dBm
Wireless Domain Services (WDS):
●
Allows wireless signals to be repeated by up to 2 compatible receivers
Wi-Fi Multimedia (WMM):
●
WMM with QoS (802.11e)
●
WMM Power Save (WMM-PS)
Active WLAN clients
●
Up to 64 clients
Service Set Identifiers (SSIDs)
●
Up to 4 separate virtual networks
Wireless VLAN
●
Support for SSID to VLAN mapping with wireless client isolation
WLAN security
●
Wi-Fi Protected Access (WPA2, 802.11i)
