5
Regulatory Compliance and Safety Information for the Cisco IP/TV 3400 Series Servers
78-11120-01
EMC Environmental Conditions
EMC Environmental Conditions
This section applies to products to be installed in the European Union.
This equipment in intended to operate under the following environmental conditions with respect to
EMC:
1. A separate defined location under user’s control.
2. Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27.
3. Where applicable, AC power distribution shall be TN-S or TN-C (as defined in IEC 364-3).
In addition, if equipment is operated in a domestic environment, interference may occur.
Class A Warning Statements
FCC Class A Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning
Modifying the equipment without Cisco's authorization may result in the equipment no
longer complying with FCC requirements for Class A or Class B digital devices. In that
event, your rightto use the equipmentmay be limited byFCC regulations, andyou may be
required to correct any interference to radio or television communications at your own
expense.
Canada Class A Warning
CISPR 22 Class A Warning
Warning
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Warning
This Class A digital apparatus complies with Canadian ICES-003.
Attention
Cet appareil de la classe A est conforme à la norme NMB-003 de Canada.
