
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 23
Models WAN Interface LAN Interfaces 802.11g/n Option Embedded 3G Integrated ISDN Dial
Backup
(Annex A)
Cisco 887V VDSL2 over basic
telephone service
4-port 10/100-Mbps
managed switch
Yes (Cisco 887V) Yes (Cisco 887VG) Yes
Cisco 888 G.SHDSL (ATM) 4-port 10/100-Mbps
managed switch
Yes (Cisco 888W) Yes (Cisco 888G) Yes
Cisco 888E G.SHDSL (EFM) 4-port 10/100-Mbps
managed switch
Yes (Cisco 888W) Yes (Cisco 888EG) Yes
Cisco 888EA Multimode G.SHDSL
(EFM/ATM)
4-port 10/100-Mbps
managed switch
No No No
Table 2. Cisco 880 Series Voice Models
Models WAN Interface LAN Interfaces Voice Ports 802.11g/n Option
Cisco881V 10/100-Mbps Fast
Ethernet
4-port 10/100 Mbps managed
switch
4 foreign-exchange-station (FXS)
ports, 2 Basic Rate Interface(BRI)
ports and 1 foreign-exchange-office
(FXO) port for public-switched-
telephone-network (PSTN) fallback
No
Cisco887VA-V Multi-mode
VDSL2/ADSL2/2+ over
POTS
4-port 10/100 Mbps managed
switch
4 foreign-exchange-station (FXS)
ports and 2 Basic Rate Interface(BRI)
ports
Yes (Cisco887VA-V-
W-K9)
Cisco 881 SRST 10/100-Mbps Fast
Ethernet
4-port 10-/100-Mbps managed
switch
4 foreign-exchange-station (FXS)
ports and 1 FXO port for public-
switched-telephone-network (PSTN)
fallback
Yes (Cisco 881
SRSTW)
Cisco 888 SRST G.SHDSL 4-port 10-/100-Mbps managed
switch
4 FXS ports and 1 Basic Rate
Interface (BRI) port for PSTN fallback
Yes (Cisco 888
SRSTW)
Cisco 881 with
Cisco Unified
Border Element
10/100-Mbps Fast
Ethernet
4-port 10-/100-Mbps managed
switch
No No
Cisco 886VA with
Cisco Unified
Border Element
Multimode
VDSL2/ADSL2/2+ over
ISDN
4-port 10-/100-Mbps managed
switch
No No
Cisco 887VA with
Cisco Unified
Border Element
Multimode
VDSL2/ADSL2/2+ over
basic telephone service
4-port 10-/100-Mbps managed
switch
No No
Cisco 888E with
Cisco Unified
Border Element
G.SHDSL (EFM) 4-port 10-/100-Mbps managed
switch
No No
Cisco 888 with
Cisco Unified
Border Element
G.SHDSL (ATM) 4-port 10-/100-Mbps managed
switch
No No
The Cisco 880 Series is ideal for small branch offices and teleworkers who need to be connected to larger
enterprise networks as well as small businesses for either voice or data applications. These routers help extend
corporate networks to secure remote sites while giving users access to the same applications found in a corporate
office. When users require WLAN access, visibility and control of network security are even more critical at the
remote site. The Cisco 880 Series meets this need with a single device that combines integrated 802.11g/n
capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication with IEEE
802.1x with Cisco Extensible Authentication Protocol (LEAP) and Protected EAP (PEAP) and encryption with WPA
Temporal Key Integrity Protocol (TKIP). (Refer to the wireless solution overview and security data sheet for more
information. The Cisco 880 Series models that include the integrated access point can use either autonomous or
Cisco Unified WLAN modes. In Cisco Unified WLAN mode, as part of an enterprise WLAN architecture, all WLAN
functions are centrally managed through Cisco Wireless LAN Controllers and the Cisco Wireless Control System
(WCS).