Dil ID: 6
Dil Adı: turkish
Dil Kodu: tr5tayfun Chicago Electric Markası'nın Ürünleri
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi
Anasayfa > Markalar > Chicago Electric > > 67119
Page 12
For technical questions, please call 1-800-444-3353.
Item 67119
SAFETY OPERATION MAINTENANCESETUP
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified
technician.
TO PREVENT SERIOUS INJUR
Y
TO PREVENT SERIOUS INJURYTO PREVENT SERIOUS INJUR
FROM A
Y FROM AY
CC
IDENTAL
OPERATION:
Make sure that the Trigger is in the off
-
position and unplug the tool from its
electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJUR
Y
TO PREVENT SERIOUS INJURYTO PREVENT SERIOUS INJUR
FROM TOOL FAILURE:
Y FROM TOOL FAILURE:Y
Do not use damaged equipment.
If
abnormal
noise or vibration
occurs, have the problem corrected before further use.
C
leaning, Maintenance, and
Lubrication
1.
BEFORE EA
C
H USE,
inspect the general
condition of the tool. Check for:
•
loose hardware,
•
misalignment or binding of moving parts,
•
damaged cord/electrical wiring,
•
cracked or broken parts, and
•
any other condition that may
affect its safe
operation.
2.
AFTER USE,
wipe external surfaces
of the tool with clean cloth.
3.
Do not use any abrasive or solvent-based cleaners.
4.
Regularly clean all ventilation openings by
periodically brushing with a soft brush and/
or blowing clear with compressed air.
5.
For blade changing instructions
see
Tool Set Up on page
9
.
6.
WARNING! If the supply cord of this
power tool is damaged, it must be replaced
only by a qualified service
technician.