Silverado/Sierra Hybrid - 2011
4-2 Storage
4. Tilt the clamp assembly so that
the locator is in the slot, pull
down on the assembly, and slide
the clamp under the edge of the
inner lip of the bed rail.
5. Pull the handle toward the rear
of the truck to engage the clamp.
Make sure the locator is secure
into the slot (A). If unable to
completely engage clamp, see
the tightening and loosening
procedures later in this section.
6. The clamp should be securely
engaged. Shake the handle
assembly to make sure the
handle does not move.
7. There are locking features on
the front clamps only. With the
handle in the clamped position,
push the locking tab to engage
the lock.
8. Repeat the clamp attachment
steps 3 through 7 for the
opposite side.
