78
4 Right-click the network adapter, then click Properties.
5 If the “User Account Control” screen opens, click Yes or Continue.
6 Select “Internet Protocol Version 4 (TCP/IPv4)” then click Properties.
7 To have DHCP set your IP address settings automatically, check “Obtain an IP address automatically” and “Obtain
DNS server address automatically”.
Alternately, you can configure the settings manually. Example:
If the router’s IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: leave blank
8 Click OK.
Windows Vista
To configure TCP/IP in Windows Vista, follow the procedure below.
1 Open Control Panel.
2 Click Network and Sharing Center.
3 Click Manage network connections on the left side menu.
4 Right-click the network adapter, then click Properties.
5 If the “User Account Control” screen opens, click Yes or Continue.
6 Select “Internet Protocol Version 4 (TCP/IPv4)” then click Properties.
7 To have DHCP set your IP address settings automatically, check “Obtain an IP address automatically” and “Obtain
DNS server address automatically”.
Alternately, you can configure the settings manually. Example:
If the router’s IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: leave blank
8 Click OK.
