72
7 If the access point supports WPS or AOSS, you can use either to connect the AirStation. Once the access point is
connected and its settings are displayed on the page, click Apply.
8 You can also manually select the access point. Click Search and select the access point from the available list of
detected wireless access points, then click Select. If the access point is not displayed, click Search again to refresh
the list. After you are returned to the WB page, set the wireless authentication and encryption to match that of the
access point, then click Apply.
The AirStation should now be connected as a wireless extender. Configure the AirStation’s SSID and security settings
on Wireless - 2.4 GHz (or 5 GHz). Once you are finished, you can disconnect the Ethernet cable and move the AirStation
to another location that is within range of the access point. Other devices can now connect to the AirStation to use the
Internet.
