Interconnections
• 3‑pin XLR male, balanced
• 6.3 mm jack, unbalanced
Certifications and approvals
CE Marking acc. to R & TTE directive 1999/5/EC
EMC acc. to ETSI EN 301489-1
acc. to ETSI EN 301489-9
acc. to ETSI EN 300422-2
Region Certification
Europe CE
Installation/configuration notes
Country Overview
Austria MW1-RX-F1 / MW1-RX-F2
Belgium MW1-RX-F1 / MW1-RX-F2
Czech republic MW1-RX-F1
Denmark MW1-RX-F1
Estonia MW1-RX-F1 / MW1-RX-F2
Finland MW1-RX-F2
France MW1-RX-F1
Germany MW1-RX-F1 / MW1-RX-F2
Hungary MW1-RX-F1 / MW1-RX-F2
Ireland MW1-RX-F2
Italy MW1-RX-F1 / MW1-RX-F2
Liechtenstein MW1-RX-F1 / MW1-RX-F2
Lithuania MW1-RX-F1
Luxembourg MW1-RX-F1 / MW1-RX-F2
Netherlands MW1-RX-F2
Norway MW1-RX-F1 / MW1-RX-F2
Poland MW1-RX-F1 / MW1-RX-F2
Portugal MW1-RX-F1
Slovakia MW1-RX-F2
Switzerland MW1-RX-F1
Spain MW1-RX-F2
Sweden MW1-RX-F2
United Kingdom MW1-RX-F2
Australia MW1-RX-F1
China MW1-RX-F1
Indonesia MW1-RX-F1 / MW1-RX-F2
Japan MW1-RX-F1
Korea MW1-RX-F1
Philippines MW1-RX-F1 / MW1-RX-F2
Taiwan MW1-RX-F1
Thailand MW1-RX-F1 / MW1-RX-F2
Vietnam MW1-RX-F1 / MW1-RX-F2
MW1-RX-F1 790 to 814 MHz
MW1-RX-F2 852 to 876 MHz
Parts included
Quantity Components
1 MW1-RX-F1 Wireless Microphone Receiver
or
MW1-RX-F2 Wireless Microphone Receiver
1 User manual
1 1.5 m 3-pin XLR male/female cable
1 AC/DC adapter with power cord
Technical specifications
Electrical
Power source 12 V to 18 V, 500 mA
Performance
Modulation FM
Frequency selection PLL synthesized control
Frequency range MW1-RX-F1: 790 to 814 MHz
MW1-RX-F2: 852 to 876 MHz
Channels 193 channels in steps of 125 kHz
Frequency stability ±0.005%
Technology True diversity system
S/N ratio >100 dB
Antenna 2 x
Connector BNC
HF impedance 50 ohm
Output 2 x
Connector XLR-3 male, balanced
Output level ‑12 dBV (max)
Output impedance 600 ohm
Connector 6.3 mm jack, unbalanced
Output level 0 dBV (max)
Output impedance 2.2 kohm
Squelch Pilot tone and noise mute
2 | MW1‑RX‑Fx Wireless Microphone Receivers
