Network Address Translation (NAT)
NN40011-046 Issue 1.2 BCM50 Rls 6.0 21
Select the Trigger Port tab and configure the rules as required (see table
below).
Trigger Port Settings
This is the rule index number (read-only).
Type a unique name (up to 15 characters) for identification purposes.
All characters are permitted - including spaces.
Incoming is a port (or a range of ports) that a server on the WAN
uses when it sends out a particular service. The Business Secure
Router forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Enter a port number or the starting port number in a range of port
numbers.
Enter a port number or the ending port number in a range of port
numbers.
The trigger port is a port (or a range of ports) that causes (or triggers)
the Business Secure Router to record the IP address of the LAN
computer that sent the traffic to a server on the WAN.
Enter a port number or the starting port number in a range of port
numbers.
Enter a port number or the ending port number in a range of port
numbers.
