44 Chapter 4 System configuration
NN40020-308
MBM configuration
You must configure the MBMs to function with your BCM50 system.
For more information, see the chapter “Completing the initial installation (optional)” in the
Installation and Maintenance Guide.
To configure the MBMs
1 Open Element Manager and connect to your BCM50 system.
2 From the Configuration tab, click the Resources folder to expand it.
3 Select Telephony Resources from the Resources folder. See the figure Telephony Resources
page on page 44.
Figure 9 Telephony Resources page
4 From the Modules section, select the expansion unit that you want to configure.
Keycodes are required for the expansion ports to function. If you purchase a keycode for one
expansion port only, the expansion port on the left (port 2) is active. Therefore, Expansion 1
must be connected to the active port (port 2).
5 In the Modules section, select the row of the MBM that you want to configure.
6 Double-click the Module type field to display the list of MBM types.
7 Select the type of MBM that you installed in the expansion unit.
8 Click Enable.
9 If you installed a second expansion unit, repeat steps 4 to 7 to enable the second MBM.
You can set other parameters for the MBMs depending on the type of MBM you installed.
1 minute/MBM
