Router Wizards
NN40011-043 Issue 1.2 BCM50 Rls 6.0 5
Router Wizards
Overview
The BCM50e/be and BCM50a/ba can be configured to provide connection to
an Internet Service Provider (ISP). PC’s that are connected, either directly or
via a network to the BCM50e/be/a/ba will be able to connect to the ISP for
Internet access.
The BCM50e/be can also be configured to connect to a company WAN.
This document provides information concerning the configuration of the
BCM50e/be/a/ba Router Wizards. An account with an ISP must be set up
before the procedure detailed in this document is performed.
BCM50e/be/a/ba Wizard configuration is performed within the Router Web
GUI.
Note: This guide relates to the BCM50a/ba and BCM50e/be models only.
Note: Although the BCM50a/ba models will not be supplied with BCM 6.0, it is
possible to upgrade the variants of these models to BCM 6.0, if they were
originally supplied with BCM50 R2 or BCM50 R3 software.
Note: The BCM50e/be and BCM50a/ba are fitted with slightly different model
router cards. Therefore, the screens and information required may differ
slightly. This guide is presented with both variations in separate sections.
Note: The BCM50 Integrated Router is almost identical to the Business
Secure Router (BSR) models. BCM50a/ba routers are based on the BSR252
and BCM50e/be routers are based on the BSR222.
Required Information
Before commencing Router Wizard configuration, it would be useful to obtain
the required ISP connection information. This information should be provided
by your ISP:
BCM50e/be:
Encapsulation type
Service type
Any account details that may be required for registration, if using the
PPP over Ethernet or PPTP encapsulation methods
Static or Dynamically assigned IP Address
