19
3.5.2 DIALLING USING THE DIRECT DIAL BUTTONS
1. Lift the receiver.
2. Press the required direct dial button M1, 2, or 3.
Note: Storage locations 01, 02 and 03 are dialled using the
direct dial buttons M1, M2 and M3.
3.5.3 DIALLING FROM THE PHONE BOOK
1. Lift the receiver.
2. Press the speed dial button
and the required
storage location from 01 to 18 on the number pad.
4. CALLER DISPLAY (CLIP)
Warning!
Caller display is an optional service from your telephone
provider. Your telephone will show the number in the
display if your telephone provider offers this service.
Please ask your telephone provider for further
information. If this service is not available, incoming calls
will not be shown in the display.
Using caller display, you can see with incoming calls who is
calling you. If this function is available on your line, the
display shows you the caller’s telephone number while the
telephone is ringing.
If the call is not accepted, this indication remains in the
display for 60 seconds before the current time and date are
shown once more.
Furthermore, in your absence, all calls are saved in a caller
list with date and time. Up to 99 numbers are saved in the
caller list. When the list is full, the oldest number is always
deleted from the list.
If calls are registered during your absence, the “NEW
CALL” LED flashes and the display shows the number of
newly stored numbers (XX NEW). The total number of
telephone numbers stored in the caller list is also displayed
(XX CALLS). You can find out how to view the list in the
next chapter 4.1.
4.1 VIEWING THE CALLER LIST
You can page through the caller list using the
and
buttons. You can see the latest numbers by means of the
button whereas you can view the numbers that have
been stored for some time by using the
button. When
you reach the last storage location the display shows the
message “End of list”.
The number of the currently selected storage location
between 1 and 99 appears under “CALL #” in the display.
Note!
If a caller has tried to reach you several times, the message
“RPT” appears in the display and beneath it the number of
calls. The date and time of the last call is always shown.
