ATL User Guide
AM200 Modem
98
10.2.2.4 LINE RATE
This allows you to set the required DSL line rate. If the unit has been set as a CPE, it is recommended that the
line rate is set the RateAdaption.
10.2.2.5 ENABLE LINE
This allows you to enable or disable the DSL Line.
10.2.2.6 LCD TIME
This allows you to set the inactivity timeout. The 'Up' and 'Down' arrow buttons will increment or decrement,
respectively, the LcdTimeout value. The value is in minutes. A value of "0" equates to no timeout. It is not
possible to scroll down past the "RETURN" value. Once a timeout value greater than 0 has been set, the
display will return to the Status Menu once the unit has been idle for a time equal to the timeout set.
