ATL User Guide
AM200 Modem
122
13.7 TERMINAL CONNECTION
A VT100 compatible terminal can be plugged into the 9-way D-type connector on the front panel.
The socket is wired to allow a straight connection to a PC serial port. The serial port must have pins 2, 3, 4,
5 and 6 connected.
The serial port setting is 19200 baud, 8 bits, no parity, 1 stop bit and Xon/Xoff flow control.
The RS232C interface complies with the CCITT V24/V28 standards. The maximum length of cable between
communicating devices is limited to 15.2 metres (50 feet).
