2. Press repeatedly to change the
setting. Each pressing of increases
the level number. After reaching level
6, the count starts again from level 1.
3. Press on/off to confirm the setting.
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
Make sure the appliance is in user mode.
1. Press
• The indicators , ,
and are off.
• The indicator still flashes.
• The indicator shows the current
setting.
– If the indicator is on = the
acoustic signal is activated.
– If the indicator is off = the
acoustic signal is deactivated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically and
remains ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3 minutes,
the running programme ends.
AirDry is automatically activated with all
programmes excluding Rinse Hold (if
applicable).
To improve the drying performance refer
to the Extra Dry option or activate AirDry.
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press .
• The indicators
, ,
and are off.
• The indicator still flashes.
• The indicator shows the current
setting.
– If the indicator is on =
AirDry is activated.
10
