• The indicators and go
off.
• The indicator continues to flash.
• The display shows the current
setting: e.g.
= level 5.
• The acoustic signals sound: e.g. 5
intermittent signals = level 5.
3. Press
again and again to change the
setting.
4. Press the on/off button to confirm the
setting.
The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
Use of rinse aid and multi-
tablets together
When you activate the option Multitab, the
rinse aid dispenser no longer releases rinse
aid. However if you are using multi-tablets
and the drying results are not satisfactory,
we suggest to use multi-tablets and rinse
aid together. In this case you have to
activate the rinse aid dispenser.
The rinse aid dispenser will remain activated
until you modify the setting again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
and until
the indicators , and
start to flash and the display is blank.
2. Press
.
• The indicators and go off.
• The indicator continues to
flash.
• The display shows the current
setting: = rinse aid dispenser
deactivated.
3. Press to change the setting.
= rinse aid dispenser activated.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs and when you set
the level of the water softener. It is not
possible to deactivate these acoustic
signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is deactivated
but it is possible to activate it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
and until
the indicators
, and
start to flash and the display is blank.
2. Press .
•
The indicators and go off.
• The indicator continues to
flash.
• The display shows the current
setting: = Acoustic signal off.
3. Press
to change the setting.
= Acoustic signal on.
4. Press the on/off button to confirm the
setting.
10
