Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003471
Page 3
R SERIES
The R-series roller rack is installed by placing the roller arm
assembly mounting channel over the rear cross member and
securing in place with a 1/2” x 4-1/2” hex bolt and lock nut.
(See Diagram A). Note that it should be left loose until the
boat is placed on the trailer. Once the proper positions is de-
termined, it may be tightened. Repeat on the other roller arm
assembly.
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Diagram A, Detail C).
