105
C.2 Changing Features in a Profile
Feature settings in a profile may be changed through the keypad by following
the steps below.
Selecting and loading a profile (even the profile in current use)
returns all features to the factory default settings!
Changing Features:
1. Press the ON LINE/MENU key to take the printer Off line.
2. Press the PROFILE key to select the profile being changed.
3. Press the ENTER key to load the selected profile.
Figure C-2. Changing Features in a Profile
4. Press the FEATURE çç key or FEATURE èè key to scroll the display
until you reach the feature to be changed.
5. Press the SETTINGS éé key or SETTINGS êê key to scroll the display
until you reach the value you wish to set.
6. Press the ENTER key to activate and store the new value.
7. Repeat steps 4 through 6 as necessary until all features are correctly set for
your application. You must press the ENTER key to save selections before
selecting a new feature.
8. Press the ON LINE/MENU key to exit Setup Mode.
PROFILE
ENTER
KEY
FEATURE
SETTINGS
KEYS
