The REVO1 is a compact two-way passive, line array system, intended for use in arrays with fixed curvature,
up to six cabinets of SAT208P. REVO1 is a versatile loudspeaker system for medium & large Indoor venues.
it is suitable in small and medium outdoor scale application, or as a delay tower for large scale sound
reinforcement system.
REVO1 was born for making a line-array with fixed curvature, with 100 horizontal & 40 Vertical coverage
pattern, aim to simulate a coherent waveguide with six enclosure.
A main frame hardware defines the tilting of the complete array system between +20 /-25 . The SAT208P
includes a dual angle pole socket, plus the accessory for a suspension options. It is easy to use integral
rigging hardware, and give the possibility to assemble a max of6xSAT208P in suspension or 1x SUB118P
plus4xSAT208P in the same way as a single source. A high frequency selector is included in the passive
crossover for giving you more flexibility to define an amplitude shading of the REVO1. The 0dB position is
normally used to coverage the near field audience. The +3dB position is normally used to coverage the far
field audience. The SAT208P is normally used in Passive mode, and no restriction exist for use in Bi-Amp
mode with the way of Passive Active selector. The SAT208P is equipped with two custom high power 8"
Mid-Bass of the 2" sandwich copper voice coil on fiberglass former, and two1"high frequency drivers with
1.4" voice coil of titanium diaphragm are used on double proprietary waveguide horn.
1. INTRODUCTION TO THE REVO1 SAT208P
Dimension Drawings for REVO1 SAT208P
423.5
7.5
620
271.5
REVO1 SAT 208P
PASSIVE
PIN1+1-: INPUT
PIN2+2-: N/C
POWER HANDLING:
400 WAES
1600 W PEAK
IMPEDANCE:
8Ohm
BI-AMP
LO-MID: 400 W
HIGH: 75 W
IMPEDANCE:
LO-MID: 8 Ohm
HIGH: 8 Ohm
BI-AMP
PIN1+1-: LO-MID
PIN2+2-: HIGH
MODEL
SERIAL
HIGH
0dB +3dB
INPUT
THRU
Designedin Italy
BI-AMPPASSI VE
2
