8
4.4 System Configuration
The letters indicate the inputs:
A = Input A
B = Input B
S = SUM (sum of inputs A and B)
3 F 2W+MSUB+MAUX
A1 B2 S34
Numbers indicate the respective outputs.1, 2, 3 4and
In the example:
The signal connected to Input is assigned to outputs .A1
The signal connected to Input is assigned to outputs .B2
checksDisable the MUTE function on the outputs you intend using and listen the sound, carry out instrumental
(if you have the necessary equipment) and any corrections required.
Then, if necessary, adjust the values of the following functions:
Output EQ Output equalizers
Output Limiter Output limiters
Note: In this first phase of setting up your sound system, the adjustment of these functions (which if not Indis
-pensable during installation) can wait. But do remember that adjusting the equalizers can also affect the
signal level. So if considerable equalization changes are made, remember to check and adjust the output
levels too, if necessary.
The of the signal on inputs and is assigned to outputs and .Sum AB 34
The system is therefore configured as shown in the following diagram.
A1 B2 S34
2W + MSUB + MAUX
LEFT
RIGHT
IN
A
IN
A+B
IN
B
HIGH
OUT
1
LOW
OUT
2
SUB L+R
OUT
3
MONO AUX L+R
OUT
4
4.5 Number of PRESETS
6 Factory PRESETS and 64 User PRESETS.
F 2x2W
A13 B24
2
