25
How to enable protection
First of all, choose the protection mode:
Two modes are available:
Total: Partial:
all editing functions are blocked and only the parameters relative to the Inputs
access to the PRESET menu is disabled can be edited (Delay, Gain, EQ),
all other editing functions are blocked
and access to the PRESET menu disabled
LOCK To t a
l
Passw
o
rd
[1234 ]
LOCK r i
t
a
l
Passw
o
rd
[1234 ]
Pa
This function is very useful whenever even temporary changes or tampering with the settings stored in the system
must be prevented. For example: fixed installations used by several operators (discotheques, clubs, conference
halls, etc.), sound system rental, etc.
Then use the and keys to access the area in which the is entered.password
IMPORTANT! password!The protection cannot be unlocked without the
So write it down or at least choose a word that is easily remembered.
The password is made up of four alphanumerical characters, obtainable using the and keys and editable
with the DIAL.
After entering the password, press ENTER.
Confirmation is only accepted if the cursor is positioned on one of the passwords four characters.Note: This
allows to avoid accidental enabling, without having seen the password.
Protection is enabled and the system takes up default status.
How to disable the protection
If the protection is enabled, when the system is in default status (i.e. when none menu are lit andLEDs therefore
no type of editing is enabled), the following appears on the display:
LOCK r i
t
a
l
Passw
o
rd
[
B
IRD]
Pa
LOCK
Passw
o
rd
[12
3
4]
ri
t
a
l
Pa
Total Protection enabled
T
A13 B24
2 U 2 2W
Partial Protection enabled
P
A13 B24
2 U 2 2W
T M
A13 B24
2 U 2 2W
