3. Configuring the WLA-9000AP
11 AirLive WLA-9000AP User’s Manual
3
3. Configuring the
WLA-9000AP
The WLA-9000AP offers many different types of management interface. You can configure
through standard web browser (http), secured web (https), command line (telnet), secured
command shell (SSH, SSH2), and SNMP management. In this chapter, we will explain
WLA-9000AP’s available management interfaces and how to get into them. Then, we will
provide the introduction on Web Management and recommended initial settings.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you
to read through the entire manual before you start. Please note the password and SSID
are case sensitive.
Default Value Settings
Wireless1 Wireless2
Device Name WLA-9000AP
Radio 802.11a 802.11a
SSID airlive1 airlive2
Channel 36 36 (auto in 802.11b/g)
WEP Disabled
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server Disabled. Available and default enabled when each of
the wireless is configured as a gateway.
DHCP IP Range 192.168.1.2 ~ 192.168.1.254
Access Password airlive
Note: Before you starting hardware connection, you are advised to find an appropriate
location to place the Access Point. Usually, the best place for the Access Point is at the
