5. Manage the WLA-9000AP
5.2 System Log
Device Status >> System Log
The WLA-9000AP maintains a system log that you can use to track events that have
occurred in the system. Such event messages can sometimes be helpful in determining the
cause of a problem that you may have encountered.
You can select System Log on the left side of the Device Status window to view log events
recorded in the system. The System Log entries are shown in the main screen along with
the log level, the severity level of messages that are being displayed (lower is severer), and
the uptime, which is the amount of time since the WLA-9000AP was boot-up.
5.3 Wireless Client Table
Device Status >> Wireless Client Table
The wireless client table lists the current wireless clients and its MAC address, state, traffic
statistics and signal strength of connected client node. In consequent, it’s available when at
least one wireless interface is set as AP mode. You can check this table by clicking
Wireless Client Table at the left side of the Device Status window.
AirLive WLA-9000AP User’s Manual
40
