Dil ID: 6
Dil Adı: turkish
Dil Kodu: tr2tayfun AEG Markası'nın Ürünleri
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



washing only mode and the indicator
of the Mode - Wash button is on.
4. Tap on the Mode - Dry button and
then on the Mode - Wash button to
perform drying only. The indicator of
Mode - Dry button illuminates and
the indicator of Mode - Wash button
goes off. The indicators and
appear on the display and the
indicator disappears.
When drying a big amount
of laundry, to have good
drying performances, make
sure that the laundry itself is
not rolled up and that is
uniformly distributed in the
drum.
12.2 Drying - Automatic levels
1. Tap on the Auto Dry button
repeatedly until the display shows
the required dryness level. The
indicators in the display illuminate
accordingly:
a.
Iron dry: for cotton items;
b.
Cupboard dry: for cotton and
synthetic items;
c. Extra dry: for cotton items.
The display shows the drying
programme duration.
2. Touch the Start/Pause button to start
the programme.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
12.3 Timed Drying
1. Tap on the Time Dry button
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator goes off and
the indicator
comes on.
Each time you tap on this button the
time value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pause to start the
programme.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
12.4 At the end of the drying
programme
The appliance stops automatically.
The acoustic signals operate (if they
are active).
In the display comes on.
The indicator of the Start/Pause
button goes off. The door locked
goes off.
The appliance continues to operate
with the anti-crease phase for
approximately 30 minutes or more if
Anti-crease option was set.
The anti-crease phase reduces
creasing.
You can remove the laundry before
the anti-crease phase is completed.
We recommend, for better results,
that you remove the laundry when the
phase is almost completed or
completed. The indicator remains
lit.
Press the On/Off button for some
seconds to deactivate the appliance.
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
www.aeg.com36