3. Touch the Stains/Prewash and the
Plus Steam buttons simultaneously
(by touching the two buttons at the
same instant, as shown in the next
drawing) for some seconds until the
display shows the default level C04
and the indicator goes on. It
means the water softener is active
during washing only.
4. Touch repeatedly the Stains/Prewash
button until the desired level appears
(from C01 to C07).
5. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to set the water softener
also during rinse phase
The factory setting allows to soften the
water during washing phase only. This
setting satisfies most of the use
condition. However, if the inlet water is
particularly hard (C06 and C07 levels),
we suggest to set the water softener also
during rinsing phase to preserve the
fabric softness.
Once you have entered the menu by
pressing Stains/Prewash and the Plus
Steam buttons:
1. Touch the Plus Steam button. The
goes on.
This setting increases
the salt consumption.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to deactivate the water
softener
Once you have entered the menu by
pressing Stains/Prewash and the Plus
Steam buttons:
1. By touching the Plus Steam button
twice, the water softener is excluded
completely. The indicator and
go off and the appears in
the display.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
Water hardness levels
Levels Water hardness range
°f
(French de-
grees)
°d
(German de-
grees)
°e
(English de-
grees)
mmol/l ppm
C01 ≤5 ≤3 ≤ 4 ≤0.5 ≤ 50
C02 6 - 13 4 - 7 5 - 9 0.6 - 1.3 60 - 130
C03 14 - 21 8 - 11 10 -15 1.4 - 2.1 140 - 210
C04
1)
22 - 29 12 - 16 16 - 20 2.2 - 2.9 220 - 290
C05 30 - 37 17 - 20 21 - 26 3.0 - 3.7 300 - 370
C06 38 - 45 21 -25 27 - 32 3.8 - 4.5 380 - 450
ENGLISH 13
