10.4 Liquid or powder
detergent
1.
2.
3.
4.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
10.5 Activating the appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
3. Press button Ein/Aus - Marche/Arrêt
to activate the appliance.
A short tune sounds.
10.6 Setting a programme
1. Turn the programme knob and set
the programme:
• The indicator of Start/Pause
flashes.
• The display shows the
programme duration.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set
option comes on.
If you set something
incorrect, the display shows
the message Err.
10.7 Starting a programme
without the delay start
Press button Start/Pause to start the
programme.
The relevant indicator stops to flash and
stays on.
The programme starts, the lid is locked.
The display show the indicator
.
ENGLISH
13
