15
Switching RINSE + on and off
When RINSE + is switched on, there are two additional rinses in the
COTTONS/LINEN, EASY-CARES/EASY IRON, DELICATES and GENTLE
RINSE programmes. RINSE + remains permanently saved – even after
the appliance is switched off.
To switch on RINSE +:
1. Turn the programme knob to COTTONS/LINEN, EASY-CARES or
DELICATES (at any temperature).
2. Hold down the buttons PRE-WASH and DELAY TIMER at the same time,
until RINSE and RINSE + light up on the programme progress display.
RINSE + is now permanently switched on.
RINSE + is lit on the programme progress display before the start of the
programme and during the additional rinses.
To switch off RINSE +:
1. Turn the programme knob to COTTONS/LINEN, EASY-CARES or DELI-
CATES (at any temperature).
2. Hold down the buttons PRE-WASH and DELAY TIMER/EASY IRON at the
same time, until RINSE + goes out on the programme progress display.
RINSE + is now permanently switched off.
Setting the delay timer
The DELAY TIMER button allows the start of a programme to be de-
layed.
1. Select programme.
2. Press DELAY TIMER button once, if the wash programme is to start after
6 hours. The display 6h lights up.
Press DELAY TIMER button twice, if the wash programme is to start af-
ter 3 hours. The display 3h lights up.
3 If you press the DELAY TIMER button again, the time delay is cancelled.
The display goes out.
3. To activate the time delay, press the START/PAUSE button.
Note: If a time delay of 6 hours is selected, the display 6h is lit. After
3 hours the display changes and 3h is lit. After a total of 6 hours the
wash programme then starts.
