Instructions for use
22
Set the Delay Timer/Soaking Duration
Delay Timer
The button DELAY TIMER (ZEITVORWAHL, PARTENZA RITARDATA) allows
the start of a washing program to be advanced by 1 to a maximum of
19 hours.
0 To do this, press the button DELAY TIMER
(ZEITVORWAHL, PARTENZA RITARDATA) as of-
ten as necessary until the required start delay
is shown in the multidisplay, e.g.12h in the
form for a program start delay of 12 hours.
If19h is shown and you press again, 0h and
afterwards the run time of the set washing program appears (display in
minutes, e.g.126).
In this state, the delay timer is not set.
3
Once the delay timer has been set, it will only be activated after press-
ing the START/PAUSE button.
Soaking Duration
With the SOAKING (EINWEICHEN, AMMOLLO) button pressed, you can
extend the soaking duration with the button DELAY TIMER (ZEITVOR-
WAHL, PARTENZA RITARDATA) (maximum 10 hours and approx. 20
min.).
3
Without delay timer, the soaking duration is approx. 30 minutes, plus a
pre-wash time of approx. 20 minutes.
0 To set, press the button DELAY TIMER (ZEITVORWAHL, PARTENZA RITAR-
DATA) as often as necessary until the required soaking duration is
shown in the multidisplay, e.g.1h (= 1 hour).
After approx. 2 seconds, the multidisplay
shows the run time in minutes.
This run time is comprised as follows:
3
While SOAKING (EINWEICHEN, AMMOLLO) is running, PRE WASH (VOR-
WÄSCHE, PRELAVAGGIO) lights up on the program sequence display.
selected soaking period e.g. – 1h =60 minutes
+ heating up/prewash period e.g. approx. 20 minutes
+ run time of the selected washing program e.g. approx. 126 minutes
=
displayed value e.g. approx. 206 minutes
