Opening the door after the programme has started
First set the machine to PAUSE by pressing the START/PAUSE button.
The door can be opened when the door locked light has gone out.
If the door does not open, this means that the machine is already heat-
ing, that the water level is above the bottom edge of the door or that
the drum is turning.
If you cannot open the door but you need to open it you have to switch
the machine off by depressing the ON/OFF button . After about 3
minutes the door can be opened (pay attention to the water level and
temperature!). To restart the programme depress ON/OFF button again
after closing the door.
51
QUICK WASH (KISA PROGR.)
By pressing this button the washing time is reduced. For use when
washing lightly soiled laundry.
This option is not available with the wool and economy programmes.
EXTRA RINSE (EKSTRA SU)
Can be used with all programmes except the wool programme. The
machine performs 4 rinses instead of 3.
This option is recommended for people who are allergic to detergents
and in areas where the water is very soft.
Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up
the programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme
has finished, the END (PROGRAM SONU) pilot
light comes on.
When the light FILTRE IKAZ illuminates this means
that the drain filter must be cleaned.
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the RESET position X.
Warning! After a programme which ends with water in the drum
(ANTI-CREASE option), turn the selector dial first to X and then to the
DRAIN programme “D”.
Altering a programme which is running
To alter a programme, first set the machine to PAUSE by pressing the
START/PAUSE button .
Any function can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start
the selected programme.
To modify the selected programme turn the programme selector dial to
X and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
50
Description of the appliance Description of the appliance
